On the Synthesis of Some 2-Arylhydrazono-3-oxothieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridines by Reaction of Nitrilimines with 2-Mercaptonicotinic Acid

Summary. Nitrilimines prepared from N-arylhydrazono chlorides reacted with 2-mercaptonicotinic acid yielding the corresponding addition products, 2-[(2-oxo-1-arylhydrazonopropan-1-yl)mercapto] nicotinic acids, which were treated with 1,1-carbonyldiimidazole in THF affording by cyclocondensation the corresponding hitherto unknown 2-arylhydrazono-3-oxothieno[2,3-b]pyridines.     

NMR Study of the Stoichiometry, Stability, and Ligand Interchange of Silver Ion-Hexathia-18-crown-6 Complex in Binary Dimethyl Sulfoxide Solvent Mixtures at 300 K

Proton NMR was used to study the complexation reaction between silver ion and hexathia-18-crown-6 in a number of binary mixed solvents of dimethyl sulfoxide with acetonitrile and methanol. Formation constants for the resulting 1:1 complexes in different solvent mixtures were determined by computer fitting of the chemical shift-mole ratio data. The influence of solvent composition on the stability of the resulting complex is discussed. The exchange kinetics of Ag⁺-hexathia-18-crown-6 in 70-30 wt.% dimethyl sulfoxide-acetonitrile and 75-25 wt.% dimethyl sulfoxide-methanol were studied by proton NMR line-shape analysis. In both solvent mixtures, the exchange of thiacrown ether between the free and complexed sites was found to proceed via a dissociative pathway. The exchange rates and the activation parameters E _a, H , S, and G for the ligand exchange were determined and the influence of solvent properties on these parameters discussed.     

Calculation of the viscosity of binary liquids at various temperatures using Jouyban-Acree model

Applicability of the Jouyban-Acree model for calculating absolute viscosity of binary liquid mixtures with respect to temperature and mixture composition is proposed. The correlation ability of the model is evaluated by employing viscosity data of 143 various aqueous and non-aqueous liquid mixtures at various temperatures collected from the literature. The results show that the model is able to correlate the data with an overall percentage deviation (PD) of 1.9+/-2.5%. In order to test the prediction capability of the model, three experimental viscosities from the highest and lowest temperatures along with the viscosities of neat liquids at all temperatures have been employed to train the model, then the viscosity values at other mixture compositions and temperatures were predicted and the overall PD obtained is 2.6+/-4.0%.     

Mesoporous Au/Fe2O3 catalyst for propargylamines synthesis via CH2Cl2 under visible light irradiation

The AHA coupling of amines, haloalkane and alkynes under UV visible light was achieved with a higher yield in the presence of Au/Fe₂O₃. The catalyst was prepared by two methods using different gold content and then characterized by XRD, UV–vis, BET, TEM, ICP-OES and TPR spectroscopies. A comparative study of the ordinary and photocatalytic conditions, showed that the UV visible light could activate the gold nanoparticles and lead to the formation of CH₂Cl^? and Cl^? radicals through CH₂Cl₂ fragmentation. The propargylamine was afforded at low temperature and a short time using 2% Au/Fe₂O₃. The catalyst was stable for five cycles with good photoactivity.

Graphical abstract

     

Optimization of the extraction of paclitaxel from Taxus baccata L. by the use of microwave energy

A simple and rapid microwave-assisted extraction (MAE) procedure was developed and optimized for the extraction of paclitaxel (Taxol) from the needles of yew trees Taxus baccata L. grown in Iranian habitats. The samples, immersed in a methanol-water mixture, were irradiated with microwaves in a closed-vessel system. The method was evaluated using a factorial design approach based on parameters such as extraction time, temperature, methanol concentration in water (v/v), and the ratio of grams of sample to 10 mL of solvent. Statistical treatment of the results revealed that the selected parameters were all significant except the extraction time. Optimum conditions would be 1.5 g samples in 10 mL solvent (90% methanol), an extraction temperature of 95 degrees C, and an extraction time of 7 min. The extracts has been analyzed by reverse-phase high-performance liquid chromatography with UV detection (LC/UV) at 227 nm for quantification. Liquid chromatography-tandem mass spectrometry (LC-MS/MS) was used for confirmation. The main advantage of the proposed MAE method versus conventional solvent extraction (CSE) are the considerable reductions in time (7 min versus 16 h) and in solvent consumption (20 mL versus 150 mL). The MAE procedure yielded extracts that could be analyzed directly without any preliminary clean-up or solvent exchange steps. Both extraction methods show RSDs lower than 10% and lead to comparable recoveries of paclitaxel (87-92%).     

A novel one-pot synthesis of some new interesting pyrrole derivatives

[reaction: see text] 11-(1H-Pyrrol-1-yl)-11H-indeno[1,2-b]quinoxaline and 3-(1H-pyrrol-1-yl)indolin-2-one derivatives have been synthesized in good yields in a novel, one-pot, and efficient process by condensation of 11H-indeno[1,2-b]quinoxalin-11-one or isatin derivatives with 4-hydroxyproline on solid-support montmorillonite K10 under microwave irradiation.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

A hyperbranched polyamidoamine dendrimer grafted onto magnetized graphene oxide as a sorbent for the extraction of synthetic dyes from foodstuff

Microchimica Acta - Graphene oxide nanosheets were modified with magnetite nanoparticles, and a hyperbranched polyamidoamine dendrimer was then covalently attached to their surface. The resulting...     

A Facile One-Pot Synthesis of Highly-Functionalized Stable Heterocyclic Phosphorus Ylides in Aqueous Media

Phthalimide or succinimide undergo a reaction with dialkyl acetylenedicarboxylates and triphenylphosphine to produce highly-functionalized stable heterocyclic phosphorus ylides in good yields in water-tetrahydrofuran (6:1). This methodology is of interest because of the use of water as solvent, thus minimizing the cost, operational hazards, and environmental pollution.     

Preparation of Fe3O4@5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol copper complex: A capable nanocatalyst for the green synthesis of 1‐substituted 1H‐tetrazoles

Fe₃O₄ magnetic nanoparticles functionalized with 5,10‐dihydropyrido[2,3‐b]quinoxaline‐7,8‐diol were synthesized as was their complex with copper as a novel nanomagnetic iron oxide catalyst via a simple and green method, and characterized using various techniques. The capability of the catalyst was evaluated in the one‐pot three‐component synthesis of different tetrazoles, which showed very good results. Mild reaction conditions, good reusability and simple magnetic work‐up make this methodology interesting for the efficient synthesis of tetrazoles.